Brass valves from VIP

VIR Valvoindustria Ing. Rizzio S.p.A was stablished in 1971 in Valduggia in the province of Vercelli, is perfectly integrated in a territory which is rated today amongst the major Italian valve and tap manufacturing centres.

Company has offices and warehouses in USA and UAE. Established in 2008 an operating unit in Taizhou, named VIR Valve Manufacturing which in charge of manufacturing a number of specific ranges of valves under continuous monitoring, ensuring compliance with high quality standards. In 2010 a sales office was set up in Shanghai, named VIR Trading Shanghai Co. Ltd. to create a distribution network in China forhigh-quality and technology-intensive VIR products, which could always rely upon logistics capacity of the factory in Taizhou.

VIR core manufacture is balancing valves, shut-off valves, regulating and control valves, gate and check valves made of brass, bronze and cast iron.

Variable orifice DZR brass double regulating valve

Diameters from DN015 – ½” to DN025 – 1″
Threaded F/F (ISO 228/1 for DN15 and DN20, ISO 7/1 Rp above)

Variable orifice bronze double regulating valve with top reading

Threaded F/F (ISO 228/1)

Design according to BS7350

PN25 (Max 25bar up to 100°C, max 20bar at 130°C)

DZR brass ON/OFF terminal valve

Diameters from DN015 – ½” to DN025 – 1″
Threaded F/F (ISO 228/1 for DN15 and DN20, ISO 7/1 Rp above)
With threaded M30x1,5 connection for linear actuator
WRAS and TR CU 010 compliant

DZR brass ON/OFF terminal valve with actuator Vaurien

Supply voltage: 24V AC/DC or 230VAC
M30x1,5mm threaded nut with fast connection
Enclosure protection: IP54
2 points control
Stroke time: about 3 to 5 minutes
Failsafe, normally closed (NC)
Normally open (NO) version available on request

DZR brass ON/OFF terminal valve

Diameters from DN015 – ½” to DN020 – 3/4″

Threaded F/F (ISO 228/1 for DN15 and DN20, ISO 7/1 Rp above)

Without test points
WRAS and TR CU 010 compliant

Variable Double Regulating Valve (Static Balancing Valve)

 Flanged to PN16 EN1092-2 (DIN2533)

 Length to EN558-1 Series 1 (DIN 3202 F1)

 with pressure tapers (¼〞ISO 7/1 RP)

Brass automatic air vent

Threaded M (ISO 228/1)
TR CU 010 compliant 
WRAS compliant 
Available in the following versions                              

Brass strainer

Diameters from DN015 – ½” to DN100 – 4″

SS Mesh Screen, ISO228-1 PN16

Spring-loaded brass check valve

Threaded F/F (ISO 7/1 Rp)
To be installed horizontally or vertically
Minimum opening pressure 0,03bar

Brass ball bib cock

Diameters from DN015 – ½” to DN025 – 1″
Threaded M (ISO 228/1) with hose union
Air testing according to EN12266-1
Blow-out proof stem
With handle or butterfly

Brass gate valve

Diameters from DN010 – ⅜” to DN150 – 6″
Threaded F/F (ISO 228/1)
Non-rising blow-out proof stem
Adjustable packing
Metal seal
TR CU 010 compliant

Full port brass ball valve

Diameters from DN10 – ⅜” to DN100 – 4″
Threaded F/F (ISO 228/1)
Air testing according to EN12266-1
Blow-out proof stem
O-ring + adjustable packing

Full port brass ball valve

Diameters from DN10 – ⅜” to DN50 – 2″
Threaded M/F (ISO 228/1)
Air testing according to EN12266-1
Blow-out proof stem
O-ring + adjustable packing

Full port brass ball valve with drain

Diameters from DN15 – ½” to DN50 – 2″
Threaded M/M (ISO 228/1)
Design according to MSS-SP-110
Air testing according to EN12266-1
Blow-out proof stem, adjustable packing

Full port brass ball valve

Diameters from DN008 – ¼” to DN050 – 2”
Threaded F/F (ISO 7/1 Rc)
Design according to EN331
Air testing according to EN12266-1
Blow-out proof stem

Company website:

https://www.vironline.com/en/

LinkedIn: