DELSOT ELECTRIC HEATING EQUIPMENT

The nomenclature of DELSOT CJSC plant includes more than 65,000 types of tubular electric heaters: general industrial, finned, cartridge, water blocks, including the most complex configurations of electric heaters according to sketches and drawings of customers.

 On the basis of tubular electric heaters, more than 80 electric heating appliances for household and industrial purposes from 0.5 to 250 kW are produced, including control systems. These are electric air heaters, fan heaters, heat guns and curtains. DELSOT manufactures the widest range of electric heaters. These include wall and floor electric convectors, oil radiators, infrared heaters, electric stoves for saunas and baths, explosion-proof heaters, industrial electric furnaces, as well as electric vehicle heaters.

 Such a wide range of electrical heating technology allows solving technical tasks of any complexity to create comfort in various types of premises.

Electric heater (heat gun) for home, garden and industrial premises.

The electric air heater (heat gun) of the СФО – 18 M series is designed for premises in which there is no constant heating and it is necessary to quickly create a comfortable temperature. The main advantage of the electric air heater (heat gun) СФО – 18 M is the speed of heating the air to the set temperatures, the air heater operates in continuous heating mode, thanks to the forced circulation of hot air, the heater evenly distributes heat in different parts of the heated premises.

Complete set

СФО – 18 M electric air heater (heat gun) – 1 pc.
Set of mounting parts (foot) – 1 set;
Instruction manual – 1 pc.

Product design

The electric air heater (heat gun) of the СФО – 18 M series is a cylindrical body made of 0.8 mm thick metal painted with heat-resistant paint in which tubular electric heaters and an electric motor with a fan are placed. In order to ensure safety, the front and back of the body are covered with grilles, the heat gun is equipped with overheating protection. To remove residual heat from the heaters, the heater is equipped with a thermal delay sensor, which ensures that the fan continues to work until the heating elements cool down completely. The electric air heater is controlled using key switches that allow adjusting the air temperature by turning on and off the power levels

ЭВУБ - 1.0 LUX electric convector (1 kW/220V; thermostat, IP20)

Electric convector of the ЭВУБ – 1.0 LUX series is designed for heating residential areas by natural convection. The heater distributes heat evenly, providing thermal comfort in a heated room. The modern design of the heater will fit into almost any interior. The main advantage of the ЭВУБ – 1.0 LUX electric convector is the versatility of installation, it can be both wall-mounted and floor-mounted, cost-effectiveness, safety in operation.

Complete set

ЭВУБ – 1.0 LUX electric convector – 1 pc.;
Instruction manual – 1 pc.;
A set of mounting parts – 1 pc.

Product design

ЭВУБ – 1.0 LUX electric convector is a stainless steel casing in which finned electric heaters are located. The electric convector is controlled using a key switch and a bimetallic thermostat. The heater is equipped with overheating protection and is designed for continuous operation without supervision, provided that the installation and operation rules are followed. 

 

ЭИ(п)-1.0 infrared electric heater (1.0 kW/220V)

The infrared heater of the ЭИ(п) - 1.0 series is designed for heating residential areas by means of infrared radiation. The heater evenly heats the surfaces of objects that fall into the radiation field, which in turn give heat to the air, providing thermal comfort in a heated premises. The main advantage of the ЭИ(п) - 1.0 infrared heater is its efficiency, since only those areas where it is necessary are heated without heating the entire volume of the premises.

Complete set

ЭИ(п) infrared heater - 1.0 – 1 pc.;
Instruction manual – 1 pc.;
Mounting parts – 1 set.

Product design

ЭИ(п) - 1.0 infrared heater is a metal casing painted with heat-resistant paint in which an aluminum radiator of a closed type with built-in tubular electric heaters is located. The heater is controlled using the TR – 90 thermostat (not included in the package).

ЭРМПБ - 1.5 oil-filled electric radiator (1.5kW/220V; 7speeds; thermostat)

The oil-filled electric radiator of the ЭРМПБ - 1.5 series is designed for heating residential areas by natural convection. The heater distributes heat evenly, providing thermal comfort in a heated room. The modern design of the heater will fit into almost any interior. The main advantage of the ЭРМПБ - 1.5 oil electric heater is its mobility and energy consumption.

Complete set

ЭРМПБ electric radiator - 1.5 – 1 pc.;
Wheel support with fasteners – 2 pcs.;
Instruction manual – 1 pc.;

Product design

ЭРМПБ - 1.5 electric radiator is a metal section painted with heat-resistant paint filled with a heat-transfer liquid. A heating element is mounted in the lower part of the housing. The electric radiator is controlled using a key switch with an on indicator and a bimetallic thermostat. The heater is equipped with overheating protection and is designed for continuous operation without supervision, provided that the operating rules are followed. 

Company website: Delsot.ru; delsot.com